Go Bottomextra hydlic remote for 755jd
 | dana
Join Date: Posts: 1 
|
1999-08-08 6739
I have a 755jd,how hard or is it possible to put another remote & seperate lever for the back of tractor.then when i used my 3-point cement mixer I wound not have to unhook & rehook my loader bucket hoses.since I use them at the same time and what kind of price could I be looking at?thanks
Reply to |
Quote Reply |
Add Photoextra hydlic remote for 755jd
| Ted
Join Date: Posts: 1
|
1999-08-08 6743
Dana:It is entirely possible and about as difficult as changing a light bulb to add an extra hydraulic outlet and valve. However, you are still limited by the amount of volume/pressure that the pump on your tractor can provide. I would guess there is not enough of either to do any two operations at once. You may have noticed this if you have tried to lift the 3pth and the loader bucket at the same time, nothing or close to nothing happens. What you need to do is take the return line (or power beyond, if your loader has one) and divert it to a new valve, then take the return line from the new valve and send it where the other line used to go (return to the tractor reservoir/pump). Connect two new lines to the valve's outlet ports, put quick-disconnects on them.......TA-DA a new remote!! Easy, huh ? Good luck. ....
Reply to |
Quote Reply |
Add Photoextra hydlic remote for 755jd
| dana
Join Date: Posts: 1
|
1999-08-09 6763
TEDdo I connet these two lines just before the quick disconnects with a tee?where would be the best place to get another single lever valve? and what size do I get?thanksdana ....
Reply to |
Quote Reply |
Add Photoextra hydlic remote for 755jd
| SteveB
Join Date: Jun 2006 Posts: 0 TheSticks, OT
|
1999-08-09 6768
Dana, I put aux remote hyd on my 670. Used a kit from JD that picked pressure and return up from the valve body that controls the 3pt lift. It cost $123 plus tax. The instructions with the kit were explicit to say the least! The rigid lines I had to install were perfect. You would then have to get a couple of quick disconnects to match what is in the kit(standard stuff at a hydraulic hose shop) and run a line to an Open Center selector valve for you cement mixer. I am planning on doing the same for my cement mixer!!!! Where did you get yours? ....
Reply to |
Quote Reply |
Add Photoextra hydlic remote for 755jd
| dana
Join Date: Posts: 1
|
1999-08-09 6775
I'll check my jd dearler about that kit.THANKSI found a 1-sack -pto driver-hyd dump at a action about 150 miles from where I live,but I've seen a few in magazines.thanks againdana ....
Reply to |
Quote Reply |
Add Photoextra hydlic remote for 755jd
| Ted
Join Date: Posts: 1
|
1999-08-09 6780
Do NOT connect the lines together or you will have no pressure. As far as sizing goes, select hoses and valve to match flow required by the implement, larger diameter = higher flow = more $$$$, but, be sure to get one that is OPEN CENTER or your hydraulics will not work. Your local dealer (parts dept.) can show you exactly what you need, and probably make the hoses for you too if you know the length needed. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This